Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
PUMPS CUC8-60B 50HZ
The submersible pump installed directly on the motor shaft, only the ground construction of electrical control equipment is required. It has low noise in underwater operation, and is very suitable for places where a quiet working environment is required, such as water supply and drainage in schools, hospitals, hotels, halls, etc.
The submersible pump is the best choice for wet well pumping. It has excellent anti-clogging performance, low noise and vibration characteristics of the operation, long service life and easy maintenance.
Product parameters
| 50Hz | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Model | Driving motor P2(KW) | Q(m3/h) | 4.0 | 6.0 | 8.0 | 10 | 12 | 14 | 16 |
| CUC8-60B | 2.2 | H(m) | 62 | 58 | 52 | 48 | 42 | 36 | 30 |
Product Features
Heavy-duty Material
Our water pump is equipped with a stainless steel head, aluminum housing, a PES impeller, brass fittings, and a water stop. Rust-proof, waterproof, and corrosion-proof for years of use.
Boost Water Flow
Powerful flow with 5.28/7.66/9.5 GPM and the head lift can reach 13/16/20 ft. The maximum pressure of this water pump is 10 Bar(145Psi). High efficiency and large flow but low energy consumption.
Three-speed Control
The water pump features a susceptible built-in electronic sensor. The pump will start up automatically when there is water flow. Power ranges from 46W to 93W. More convenient and efficient to use the pump.
Quiet Operation
This water pump for hot water boasts a powerful motor for stable performance and low noise. The average noise level is only 25dB, enabling you to enjoy the pump without disturbing your life.
Effortless to Install
The water pump is easy to install on appliances and industrial electric or gas water equipment. However, you need to keep the pump shaft horizontally after installation.
Various Application
The pump for a water heater is a convenient water pressure boosting pump used in the water heating system, such as solar water heaters, electric water heaters, domestic water pipelines, etc.
Product Specifications
Power: 93/67/46W
Voltage: 110V/60HZ
Body Color: Green/Silver
Pump Head: Stainless Steel
Pump Housing: Aluminum
Impeller Material: PES
Shaft Material: Ceramic
Bearing Material: Carbon
Noise Level: 25dB
Package Content
1 x Water Pump
2 x Brass Fittings
1 x Set of Rubber Gaskets
1 x Water-stop(3.28ft)
1 x Instruction Manual
The frequency conversion of variable-frequency water pump refers to the motor, which is adjustable frequency. The variable-frequency motor can adjust the speed and flow to achieve the purpose of energy saving. It also has the advantages of a small starting current and small maintenance workload. What is the difference between a variable frequency water pump and an ordinary water pump?
Concept definition
Ordinary water pump
The ordinary water pump is a single water pump without any other electrical control devices except the pump body and motor, which cannot realize automatic start and stop. The insulation grade of the motor of an ordinary water pump may not be class B or class F, so there is no strict requirement. At present, class F insulation motors have been widely used and can meet the requirements of general water supply and drainage fields.
Variable frequency water pump
Variable frequency water pump refers to a water pump device that realizes automatic water supply based on the configuration of ordinary water pumps with high insulation level (currently the mainstream is f), supplemented by frequency converters, microcomputer controllers, valve assembly groups, sensors, and pressure stabilizing devices. Due to the influence of variable speed on the cooling fan of a variable frequency water pump, the heat dissipation may not be very good, so a motor with a relatively high insulation grade is required. Some strict occasions may also need to be equipped with a special frequency conversion motor (no matter how the speed of the motor is adjusted, the fan of the motor runs at high speed). At present, class F insulation grade motors have been widely used.
For variable-frequency water pumps required for general purposes such as building water supply, industrial water supply, and drainage, it is only necessary to add variable-frequency control devices and related pipe valves based on ordinary water pumps, and there is no need to be equipped with special variable-frequency motors.
Differential connection
Difference
The ordinary water pump is a pump + motor; The variable frequency water pump is a small unit of pump + motor + variable frequency controller + sensor + pipe valve. Ordinary water pumps can only be operated manually, and variable-frequency water pumps can realize automatic operation.
Contact
The pump part of the variable-frequency water pump is the same as that of the ordinary water pump, except that the variable-frequency water pump motor requires a higher insulation level, and even a special variable-frequency motor is required on some occasions (no matter how the speed is adjusted, the fan of the motor runs at high speed).
At present, class F insulation grade motors have been widely used. For variable-frequency water pumps required for general purposes such as building water supply, industrial water supply, and drainage, it is only necessary to add variable-frequency control devices and related pipe valves based on ordinary water pumps, and there is no need to be equipped with special variable-frequency motors.
If you want to know more about variable-frequency water pumps, please feel free to contact us.
Application field
① In the production of chemical and petroleum sectors, most of the raw materials, semi-finished products, and finished products are liquids, and the production of semi-finished and finished raw materials into semi-finished products and finished products needs to go through complex technological processes. During these processes, pumps play a role in transporting liquids and providing pressure flow for chemical reactions. In addition, in many installations, pumps are used to adjust the temperature.
② In agricultural production, pumps are the main irrigation and drainage machinery. my country's rural areas are vast, and a large number of pumps are needed in rural areas every year. Generally speaking, agricultural pumps account for more than half of the total output of pumps. Pumps are also the most used equipment in the mining and metallurgical industries. The mine needs to be drained by pumps, and in the process of beneficiation, smelting, and rolling, pumps are needed to supply water.
③ In the power sector, nuclear power plants need nuclear main pumps, secondary pumps, and tertiary pumps, and thermal power plants need a large number of boiler feed pumps, condensate pumps, oil and gas mixing pumps, circulating pumps, and ash pumps.
④ In national defense construction, the adjustment of aircraft flaps, tail rudders, and landing gear, the rotation of warships and tank turrets, and the ups and downs of submarines all require pumps. High pressure and radioactive liquid, and some also require the pump without any leakage.
⑤ In short, whether it is aircraft, rockets, tanks, submarines, drilling, mining, trains, ships, or everyday life, pumps are needed everywhere, and pumps are running everywhere. That's why the pump is listed as a general-purpose machine, which is a major product in the machinery industry.
⑥ Electric pumps i.e. pump driven by electricity. The electric pump is composed of a pump body, a water lift pipe, a pump base, a submersible motor (including cables), and a starting protection de
