Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
PUMPS CUC8-10 50HZ
The TWL-20W is a heavy duty pump perfect for watering your lawn, garden and more. It's constructed with rugged cast iron to ensure longevity, and brass copper adapters that fit 3/4" night garden hoses. The non-slip base provides stability and safety in use.
The Cast Iron Carry Handle makes it easy to carry the pump anywhere you want to go. The cast iron housing and copper motor are corrosion resistant for long life durability. The brass copper adapters can be used with 3/4" night garden hoses and are great for watering grass lawns, gardens, plants and crops as well as general water use.
Product parameters
| 50Hz | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Model | Driving motor P2(KW) | Q (m3/h) | 4.0 | 5.0 | 6.0 | 7.0 | 8.0 | 9.0 | 10 |
| CUC8-10 | 0.55 | H (m) | 15 | 14 | 13 | 12.5 | 12 | 9 | 8 |
DETAIL DISPLAY
Cast Iron Carry Handle, take the pump anywhere you want to go.
Cast Iron Housing and Copper Motor, rugged corrosion resistant for long life durability.
Brass Copper Adapters, fit a 3/4" night garden hose and are great for watering grass lawns gardens, plants, and crops as well as general water.
Non-Slip Base is more stable and safe in use.
USER'S GUIDANCE
This Pump is Non-Submersible.
Only Be Used With Fresh Water.
Do Not Run the Pump Dry.
The pump must be filled with water through the inlet before the operation to avoid running the pump dry.
INCLUDED IN THE BOX
1pc x Pump Motor
1pc x Filter Strainer
1pc x Sealing Tape
2pcs x 3/4" GHT Brass Copper Adapter
2pcs x Replacement Brushes
TIPS
Please use the span to screw the prime plug as tight as possible. If there is still water leaking, you can use sealing tape(INCLUDED) on the prime plug and do it again.
NO WATER(PUMPING): (1) Filled water in the pump housing before plugging in and try to let the inlet hose be full of water too. (2) Install a check valve at the end of the inlet hose. The inlet hose should be rigid or reinforced hose. (3) Make sure the whole inlet hose is Well Sealed.
WATER FLOW NOT CONSTANTLY: Please tighten the inlet connector to avoid air income(To be sealed well, it is recommended to use the sealing tape).
ATTENTION: The max distance to a water source is 15FT and the max vertical suction depth down to the water source is 3FT under the standard size of the inlet hose(pipe) is 1". The bigger the inlet hose size is, the lower the vertical suction depth is.
A pump is a kind of machinery that pumps energy liquid. It is a machine that converts the mechanical energy of the prime mover into the potential energy of the pumped liquid. Driven by power machinery, it can pump liquid from low to high or far away to serve the production. The pump can pump water, oil, acid-base solution, liquid metal, pulp, mud, etc. The pump used for pumping water is called a water pump, also known as a water pump. Water pumps are used for agricultural irrigation and drainage, which improves the ability of agriculture to resist natural disasters, can increase production and ensure income, and provides material conditions for mechanization and water conservancy of agriculture.
Common problems of water pump
First of all, if it cannot be started, this is a common fault in water pump maintenance. At this time, you should first check the power supply: you can check whether the connector is firmly connected, and at the same time, you should also check whether its switch contact is tight, whether the fuse is blown, and whether the three-phase power supply is equal. For example, if you find that your power supply has an open circuit, poor contact, the fuse is blown, or phase loss, you should repair it at this time. If it is not for these problems, it may be the mechanical failure of the water pump itself.
The common reasons are: the packing is too tight or the impeller and pump body are blocked by sundries; The pump shaft, bearing and leakage reducing ring are rusted, and the pump shaft is severely bent. The solution is to loosen the filler and dredge the water diversion tank; In this way, the pump body can be disassembled to remove sundries and rust; Remove the pump shaft for calibration or replace it with a new one.
Moreover, if the water pump heats up, it may be because the bearing is damaged, or the clearance between the rolling bearing or bracket cover is too small, so the pump shaft will be bent or the two shafts will not be concentric. If the tape is too tight, there is a lack of oil or poor oil quality, the balance hole on the impeller is blocked, and the impeller loses balance, increasing the thrust to one side.
Solution: replace the bearing; Remove the rear cover and install shims between the bracket and the bearing seat.
So what if the flow is insufficient? Generally speaking, for example, the power speed is not matched or the belt slips, which makes the speed low, the axial flow pump blade installation angle is too small, the lift is insufficient, the pipeline is too long or the pipeline has a right angle bend, the suction lift is high, the bottom valve, pipeline, and impeller are partially blocked or the impeller is damaged, and the outlet pipe leaks seriously.
Our solution is to restore the rated speed first, and at the same time, remember to remove the belt oil dirt, adjust the belt tightness, and adjust the blade angle. Only in this way can we reduce the installation position of the water pump, shorten the pipeline or change the curvature of the pipeline, seal the air leakage of the water pump, compress the packing, remove the blockage, replace the impeller, replace the leakage ring, and block the water leakage.
If you want to know more about the pump, please feel free to contact us.
Application field
① In the production of chemical and petroleum sectors, most of the raw materials, semi-finished products, and finished products are liquids, and the production of semi-finished and finished raw materials into semi-finished products and finished products needs to go through complex technological processes. During these processes, pumps play a role in transporting liquids and providing pressure flow for chemical reactions. In addition, in many installations, pumps are used to adjust the temperature.
② In agricultural production, pumps are the main irrigation and drainage machinery. my country's rural areas are vast, and a large number of pumps are needed in rural areas every year. Generally speaking, agricultural pumps account for more than half of the total output of pumps. Pumps are also the most used equipment in the mining and metallurgical industries. The mine needs to be drained by pumps, and in the process of beneficiation, smelting, and rolling, pumps are needed to supply water.
③ In the power sector, nuclear power plants need nuclear main pumps, secondary pumps, and tertiary pumps, and thermal power plants need a large number of boiler feed pumps, condensate pumps, oil and gas mixing pumps, circulating pumps, and ash pumps.
④ In national defense construction, the adjustment of aircraft flaps, tail rudders, and landing gear, the rotation of warships and tank turrets, and the ups and downs of submarines all require pumps. High pressure and radioactive liquid, and some also require the pump without any leakage.
⑤ In short, whether it is aircraft, rockets, tanks, submarines, drilling, mining, trains, ships, or everyday life, pumps are needed everywhere, and pumps are running everywhere. That's why the pump is listed as a general-purpose machine, which is a major product in the machinery industry.
⑥ Electric pumps i.e. pump driven by electricity. The electric pump is composed of a pump body, a water lift pipe, a pump base, a submersible motor (including cables), and a starting protection de
