PUMPS

The Centrifugal Water Pump is designed for water supply for agricultural irrigation, mining and other fields. The centrifugal water pump is equipped with two impellers and two curved vanes. It is an ideal choice for pumping clean water. A high pressure, large diameter impeller has a blade length of more than one meter, which is a typical type of high efficiency centrifugal pump. When the impeller rotates, the surge vent on the perforated metal plate rotates with a large effective diameter, so that the pressure difference between both sides of the fan blade can be increased and increased by rotating it continuously to run smoothly and efficiently.

This Water Pump will irrigate your lawn, garden and property efficiently. The pump is built to be completely durable and will operate with even the most demanding conditions. It comes with an extra-large filter basket and see-through lid which are detachable and easy to clean and maintain. This self-priming pump provides long service life and is easy to install. The cord is a standard 5', so it can be used in a variety of different circumstances. The iron motor housing and commercial-grade reinforced thermoplastic shell ensure corrosion resistance, and the drain plug at the bottom for easy drainage after use.

The Effluent pump is a high-efficiency water pump with a 1/3HP power motor that discharges at 2450 GPH and has a maximum lift capacity of 28 feet. The pump comes with a 10-foot power cord and detachable suction filter that can handle solids up to 1/8 inch thick. The stainless steel shaft and solid aluminum impeller blade ensure stability and durability. A high-quality pump with an anti-clog, no overheating and no electric shock. Built to last, this pump can drain water out easily while saving time and space in your garage or basement. Highly corrosion resistant shell and environmental thermoplastic construction ensures less prone to mechanical failure, while the anti-clog impeller blade automatically adjusts to speed and fluid viscosity so you get a long service life.

The system has a maximum capacity of 5.5 gallons per minute and can be used in ponds up to 131 feet deep. This pump is powered by 110 alternating current through a self-priming surge protection and a built-in on-demand pressure switch that will turn it on immediately when the faucet is opened. The pump is protected from overloading, overheating and even running dry. This water pump is built to last. With a robust metal housing and industrial grade components, you can count on your pump for years. It comes with a reliable 110vAC motor that operates at 165W, providing 5.5 gallons per minute of water flow. This is an essential tool for well-hydrated plants and an effective way to save money on your monthly bill by using greywater.

This water pump is easy to install, which allows you to quickly fill the pump head, connect the hose, plug it in and water anywhere. The constant pressure water supply can automatically maintain a constant pressure for 24 hours and automatically start the standby pump according to the pressure signal to adjust the pressure steplessly. The water supply quality is good and will not cause pipe rupture when the tap boils. The water pump is manufactured in zinc alloy for lighter weight and compactness, operates on 115 volts, and is capable of pumping 330 gallons of water per hour to a height of 39 ft.

This portable and compact water pump is perfect for indoor and outdoor use. It has a low suction function that can remove water down to 1/8 inch of surface when the suction hose is used.Pump from your boat, fountain or swimming pool using this easy to use, light-weight water pump. This water pump is lightweight and easy to carry, making it the perfect companion for outdoor events including camping, fishing and hunting trips. The built-in low suction function allows you to use a 1/8 inch of surface attachment to remove water from hard surfaces like patio stones or pavers.

A centrifugal pump is a pump that transports liquid by the centrifugal force generated by the rotation of the impeller. Before the pump starts, water must be filled into the casing and suction pipe. Then, start the motor so that the pump shaft drives the impeller and makes it rotate at higher speeds. Water undergoes centrifugal motion and is thrown to the outer edge of the impeller, passing through a worm bearing and entering into a flow channel of a shell where it becomes pressurized water line of a pump.

Our water pump is constructed with a heavy-duty stainless steel pump head, aluminum pump housing, and PES impeller, rust-proof, and waterproof. Brass fittings and a water stop will come with the pump for corrosion-proof and leakage-proof. The powerful water pump has max. 40 L/min water flow, max. 10 bar pressure and max. 20 ft head lift. In addition, the super silent running property(about 25dB) can provide you with a quiet pump: high performance but low noise. This water circulator pump features a three-power control switch in 46/67/93W. It is convenient for you to adjust the flow rate to your different requirements

This water pump is great for clean or dirty water from swimming pool covers, basements, pits, ponds, window wells and other flooded areas. The pump is also perfect for irrigation, garden watering and other home requirements Save time and energy with this water pump. This pump drains water up to 3960 Gallons Per Hour( 66 gallons per minute) at 5ft. Lift water up to 31ft of vertical height. The pump hydraulically powered by an oil sealed 1HP direct drive motor and provides a constant flow to meet your requirements. The High-efficiency Water Pump is a great add-on to any household or business. Its unique ergonomic handle and hollow design for easy portability and storage, along with its high water output, makes this an indispensable piece of equipment for your residential or commercial needs.

The inlet and outlet of the pump are at the same level, and can be installed in any position and direction of the pipeline like a valve. This feature is very convenient for installation, maintenance and commissioning. This product uses stainless steel to make its main flow passage parts. The main parts are light weight, sanitary and clean. It's an ideal green environment friendly energy saving pump. The main flow passage parts are made of stainless steel by stamping, and have the characteristics of light weight, clean, sanitary, etc. It is an ideal green, environment-friendly, energy-saving pump

The pump is used for secondary pressurization by centrifugal pump because the water pressure is insufficient and low enough to meet the demand. Recommended equipment: nonnegative pressure variable frequency water supply equipment, which can be directly used without changing or replacing other parts of the whole process. It is recommended to install a pump which is used for secondary pressurization by centrifugal pump because the water pressure is insufficient and low enough to meet the demand. It can achieve stable water pressure, which can promote the normal operation of equipment and ensure the health of users.

As a professional pump manufacturer, we have vast experience in manufacturing various kinds of pumps. We have all kinds of pumps such as centrifugal, vertical or horizontal multistage and so on. The impeller is an essential element of the water pump. It's the core part to deliver the energy contained in water to the impeller. The impeller is the core part of the centrifugal pump. Its speed is high and its output is large. The blades on the impeller play a major role. The impeller must pass the static balance test before assembly. The inner and outer surfaces of the impeller shall be smooth to reduce the friction loss of water flow.